Spot Abdominal Sore 33 Weeks Pregnant

Box VIII - Walkthrough

Well, let's finish the box. We begin by cut two pieces of cardboard the same size as the previous ones that were more than fine. We recall the measures that are in the previous post: Top

= (Height of the big box + 6 mm) X (width of the big box + 2 mm)

Back Cover = Cover

As I said earlier, this system can be customized as far as the creativity to make the cover, back cover and back separately, each element can be repeated until the desired result without sacrificing the others who are to our liking. To avoid complicating the issue, I used two skin remains a friend gave me and they'll cover decks. So once we cut the cards one on the skin and left more or less than 2.5 cm. on each side, cutting it to that extent.

Glue the cardboard and put it on the skin. (Or about what we have designed as a cover logically)

corners cut at an angle to bend the sides ... We turned
a long side and we glue as seen in the image

Now, with the lateral bending and gluing, place this on the thin cardboard carton that already had assembled, glued side by side just above viewed from below would read:

.... And we now proceed to bend the other protruding from the skin that will embrace the thin cardboard

... Continue folding ...

.... and concluded turning to see the result ...

Do the same with the other board (cover).

And we have here the final result:

Another view of how it has been and will be finally

Finally we have hooked our decks with open boxes that we had prepared ... so we put these tires on your back .... and put our boxes (one inside the other, being the smallest below) to open the inside of the back, making sure they fit well and are margin on all sides. When we are ready to glue the small box and paste it to the back as seen ...

We put a weight on the set and let dry one hour (notice as in the photo can be seen protruding 3 mm margins of the box

An hour and open the book .. .

courage, and just need to glue the large box. As the girl and is attached to the base and we are great about it, but we have to queue at its surface ...

... and close the cover on it as we did before. Concluding with a weight on the set and rested an hour. When this time has elapsed we can open and view the final result ...

We found that open and close perfectly ...

closed Another view ...

And another ....

And more ...

With almost all of our comics placed

Opening ...

... and closing ... with our comics, protected from light and other environmental effects, may also placed in the library in a dignified position.

As I said in previous blog-tered, the next issue will be related to Vertice comics and special edition issues, starting with the covers and stains. You can suggest topics

in the email address listed on the side of the blog.

tackle trays collected